Skip to content
Math & Statistics

How to Solve Systems of Equations: 4 Methods With One Worked Example

Solve two linear equations by graphing, substitution, elimination and Cramer's rule – one example worked four ways, plus word problems and special cases.

Zeeshan Nawaz Zeeshan Nawaz Calculator Developer Published 3 min read
How to solve systems of equations – Tuff Search guide
Share
In this guide
  1. Method 1: Graphing
  2. Method 2: Substitution
  3. Method 3: Elimination
  4. Method 4: Cramer’s rule
  5. Check your answer
  6. When there is no single solution
  7. A word problem
  8. Which method should you use?
  9. Frequently asked questions
  10. Related calculators
  11. Related articles

A system of equations is a set of equations that share the same unknowns. Solving it means finding values that make every equation true at once. For two linear equations in x and y there are four standard methods – here is the same example solved each way, so you can pick the one that suits the problem.

Our example:

2x + 3y = 13 and x − y = −1

Method 1: Graphing

Rewrite each equation as y = mx + b and draw both lines. The solution is the point where they cross. Here y = (13 − 2x) ÷ 3 and y = x + 1, which cross at (2, 3).

Graph of the lines 2x + 3y = 13 and x − y = −1 crossing at the point (2, 3)
The solution of a system is where the lines cross.

Graphing shows what a solution means, but it is only as precise as your drawing, so it is best for checking.

Method 2: Substitution

  1. Solve one equation for one variable. From x − y = −1: x = y − 1.
  2. Substitute into the other equation: 2(y − 1) + 3y = 13.
  3. Solve: 2y − 2 + 3y = 13 → 5y = 15 → y = 3.
  4. Back-substitute: x = 3 − 1 = 2.

Substitution is easiest when one equation already has a variable with a coefficient of 1.

Try it with your numbersCramer's Rule CalculatorSolve 2×2 and 3×3 systems of linear equations with Cramer's rule.Open calculator

Method 3: Elimination

  1. Multiply equations so one variable has opposite coefficients. Multiply x − y = −1 by 3: 3x − 3y = −3.
  2. Add it to 2x + 3y = 13: the y terms cancel, leaving 5x = 10.
  3. Solve: x = 2.
  4. Substitute back: 2 − y = −1 → y = 3.

Elimination is usually fastest when the coefficients are larger or there are three equations.

Method 4: Cramer’s rule

Cramer’s rule uses determinants. For ax + by = e and cx + dy = f:

D = ad − bc x = (ed − bf) ÷ D y = (af − ec) ÷ D

  1. D = (2)(−1) − (3)(1) = −5.
  2. Dx = (13)(−1) − (3)(−1) = −13 + 3 = −10, so x = −10 ÷ −5 = 2.
  3. Dy = (2)(−1) − (13)(1) = −15, so y = −15 ÷ −5 = 3.

Cramer’s rule is a formula you can apply mechanically, which makes it handy for computers and for 3 × 3 systems. The Cramer’s rule calculator shows every determinant step for 2 × 2 and 3 × 3 systems.

Check your answer

Always substitute back into both original equations: 2(2) + 3(3) = 4 + 9 = 13 ✓ and 2 − 3 = −1 ✓.

When there is no single solution

Lines What you see Number of solutions
Cross at one point One x and one y Exactly one
Parallel Elimination gives something false, like 0 = 5; D = 0 None
The same line Elimination gives 0 = 0; D = 0 Infinitely many

A word problem

A school play sells 50 tickets for $520. Adult tickets cost $12 and child tickets $8. How many of each were sold?

  1. Let a = adult tickets, c = child tickets.
  2. a + c = 50 and 12a + 8c = 520.
  3. Substitute c = 50 − a: 12a + 8(50 − a) = 520 → 4a + 400 = 520 → a = 30.
  4. c = 50 − 30 = 20. Check: 12 × 30 + 8 × 20 = 360 + 160 = 520 ✓.

Which method should you use?

  • Graphing – to visualise or check.
  • Substitution – when a variable is already isolated or has coefficient 1.
  • Elimination – for most hand calculations, especially with three equations.
  • Cramer’s rule – for a formula-based approach or when using a calculator.

Working with polynomials instead? See the remainder and factor theorems.

Frequently asked questions

Graphing, substitution, elimination and matrix methods such as Cramer’s rule.

Substitution when a variable has a coefficient of 1; elimination for most other cases.

If elimination produces a false statement such as 0 = 5, or the determinant D is 0 and the lines are parallel, there is no solution.

Only systems with the same number of equations as unknowns and a non-zero determinant.

Estimates, not adviceResults are estimates for information only, not tax, financial, medical or legal advice. Confirm important figures with a qualified professional. See our Disclaimer.

Share this guide

Related calculators

Zeeshan Nawaz

About the author

Zeeshan Nawaz

Calculator Developer · Tuff Search

Builds and tests Tuff Search calculators, turning published formulas and official sources into tools anyone can check.

Keep reading

More math & statistics guides

View all guides
How to read a z-table – Tuff Search guide
Math & Statistics

How to Read a Z-Table: Step-by-Step Examples

Learn to read a z-table step by step: left-tail areas, right tails, areas between two z-scores, negative z-scores and reverse lookups, with…

Zeeshan Nawaz3 min read