Skip to content

Square Footage Calculator

Last updated

Your space

Measure each part of the room. For an L-shaped room, add a second section.

Section 1
Section 2
Flooring (optional)

Add about 10% for flooring cuts.

Results update as you type

—

Enter the measurements of a room or area and this square footage calculator gives the area in square feet, square metres and square yards. Add several sections for L-shaped rooms, choose circles or triangles, and include a waste allowance and price for flooring.

How to calculate square footage

  1. Measure the length and width of the space in feet. If you measure in feet and inches, convert the inches by dividing by 12 (10 ft 6 in = 10.5 ft).
  2. Multiply length × width to get square feet.
  3. For irregular rooms, split the floor into rectangles (and any circles or triangles), calculate each one and add them.
  4. For materials, add a waste allowance and round up to whole boxes, rolls or sheets.

Example: a 12 × 15 ft bedroom is 12 × 15 = 180 sq ft. In metric that is 16.7 m², and in square yards (often used for carpet) 20 sq yd.

Square footage of irregular and L-shaped rooms

Split an L-shaped room into two rectangles that do not overlap. For a 20 × 12 ft living area with a 10 × 8 ft dining nook: 20 × 12 = 240 sq ft plus 10 × 8 = 80 sq ft, giving 320 sq ft. Take away areas you do not want to count (a fixed kitchen island, a fireplace hearth) by calculating them and subtracting.

ShapeFormulaExampleArea
Rectangle / squarelength × width12 × 15 ft180 sq ft
Circleπ × radius²radius 6 ft113.1 sq ft
Half circleπ × radius² ÷ 2radius 6 ft56.5 sq ft
Trianglebase × height ÷ 210 × 8 ft40 sq ft
Trapezoid(a + b) ÷ 2 × height10 and 14 ft sides, 8 ft apart96 sq ft

Square footage of common room sizes

Table of common room sizes from 10 by 10 feet (100 square feet) to 20 by 20 feet (400 square feet) with square metres and flooring totals including 10 percent waste
Flooring totals are rounded up to the next whole square foot.

Converting square feet, square metres and acres

FromToMultiply by
Square metresSquare feet10.7639
Square feetSquare metres0.092903
Square yardsSquare feet9
Square inchesSquare feet÷ 144
AcresSquare feet43,560
HectaresSquare metres10,000

A common mistake is converting each side before multiplying and then converting again. Either convert the lengths to feet first and multiply, or multiply in metres and convert the area once using 10.7639.

Flooring, tile and cost per square foot

Flooring is sold by the box or roll, so you need the area plus a waste allowance for cuts and mistakes: about 5–10% for straight-laid planks or carpet in a simple room, 10–15% for diagonal layouts, patterned tile or rooms with many corners. For a 180 sq ft room with 10% waste you need 198 sq ft; with boxes of 20 sq ft, buy 10 boxes. Multiply the area by the price per square foot for the material cost – 180 sq ft at $4.50 is $810 – and get installation quoted separately.

How is a house's square footage measured?

For whole homes, the number in a listing is usually the finished, heated living area, not every square foot under the roof. In the US, the ANSI Z765 standard measures finished area from the exterior walls, counts each floor separately and excludes garages and unfinished basements; rooms must meet a minimum ceiling height to count. Other countries and appraisers use different rules – the UK, for example, quotes gross internal area in square metres. If you are buying, selling or valuing a property, check which method was used rather than relying on a quick room-by-room total.

Measuring tips

  • Measure wall to wall at floor level, and measure twice.
  • Round each measurement up to the next inch for materials – never down.
  • Include closets if the flooring will run into them.
  • Sketch the room and write each measurement on the sketch before calculating.
  • A laser measure is quicker and more accurate than a tape for long rooms.

Square footage of walls

Walls are measured the same way as floors: width × height. For a whole room, add the four wall widths (the perimeter) and multiply by the ceiling height, then subtract doors and windows. A 12 × 15 ft room with 8 ft ceilings has 2 × (12 + 15) × 8 = 432 sq ft of wall before openings. Use this figure for paint, wallpaper, wall panelling or tile – the paint calculator does the subtraction and the number of coats for you.

Measuring a whole house room by room

RoomSize (ft)Area (sq ft)
Living room16 × 14224
Kitchen12 × 11132
Bedroom 114 × 12168
Bedroom 212 × 10120
Bathroom8 × 648
Hall and closetsVarious60
Total752

Adding rooms gives the floor area inside the walls, which is useful for flooring, heating calculations and cleaning quotes. It will be smaller than the official square footage of the home because interior walls, stairwells and the thickness of exterior walls are not counted. For flooring, calculate each room separately so you can add the right waste allowance to each.

Square feet, square yards and carpet

Carpet and some flooring are priced per square yard. Divide square feet by 9: a 180 sq ft room is 20 sq yd. Broadloom carpet comes in fixed roll widths (often 12 ft in the US), so the amount you buy depends on the room's shape and seam layout, not just its area – ask the installer to measure before ordering.

Lot size and land area

The same formulas work outdoors. A rectangular lot 50 ft wide and 120 ft deep is 6,000 sq ft, or 6,000 ÷ 43,560 = 0.138 acres. For irregular lots, check the survey or property records, which give the official area.

Common square footage mistakes

  • Multiplying feet by inches without converting (12 ft × 6 in is 6 sq ft, not 72).
  • Adding the lengths instead of multiplying them.
  • Converting each side to metres and then dividing the area by 10.7639 again.
  • Forgetting to subtract cut-outs (islands, fireplaces) or to add closets and alcoves.
  • Measuring along skirting boards in a room that is not square – measure both diagonals; if they differ, the room is out of square and needs extra flooring at the edges.

Square metres for metric measurements

If you measure in metres, multiply directly: a 4.2 m × 3.6 m bedroom is 15.12 m², or 15.12 × 10.7639 ≈ 162.8 sq ft. If you measure in centimetres, divide the result by 10,000: 420 cm × 360 cm = 151,200 cm² = 15.12 m².

Sources

  1. Home Innovation Research Labs – ANSI Z765 square footage method (FAQ) — homeinnovation.com/services/national_standards/square_footage_method_standard_faq
  2. NIST – Guide for the Use of the International System of Units (SI) — nist.gov/publications/guide-use-international-system-units-si

Results are estimates for general information. Last reviewed: .

Zeeshan Nawaz

Written & built by

Zeeshan Nawaz

Calculator Developer · Tuff Search

Builds and tests Tuff Search calculators, turning published formulas and official sources into tools anyone can check.

FAQ

Frequently asked questions

Quick answers about the Square Footage Calculator.

Measure the length and width in feet and multiply them. A 10 × 12 ft room is 120 sq ft.

144 sq ft, or about 13.4 m².

Multiply length × width in inches and divide by 144. A 48 × 36 in area is 1,728 ÷ 144 = 12 sq ft.

Multiply by 10.7639. 20 m² is about 215 sq ft.

Usually 5–10% for simple layouts and 10–15% for diagonal or patterned layouts.

43,560 sq ft – about 4,047 m².

Still have a question? Email support@tuffsearch.com