Asphalt and concrete are the two most common hard surfaces for driveways. Both work well when they are installed on a good base, but they differ in cost, lifespan, maintenance and how they cope with your climate. Here is a side-by-side comparison to help you choose.

Cost
Asphalt usually costs less to install than concrete, which is its biggest advantage. Prices vary widely by region, driveway size, access and base preparation, so get several written quotes that list the base thickness, surface thickness and drainage work. Remember to compare lifetime cost, not just the install price: a cheaper surface that needs resurfacing sooner may cost more over 30 years.
Lifespan
A well-built, well-maintained asphalt driveway often lasts 15–20 years or more; a concrete driveway often lasts 25–30 years or more. Poor base preparation, drainage problems and heavy vehicles shorten the life of either surface far more than the material choice.
Try it with your numbersConcrete CalculatorWork out how much concrete you need for a slab, footing, wall, post hole or steps in cubic yards or m³, plus 40, 60 and 80 lb bags with waste added.Open calculatorMaintenance
- Asphalt: sealcoat every few years to protect against water, UV and oil; fill cracks promptly; patch potholes. See our asphalt driveway maintenance guide for a full schedule.
- Concrete: clean stains, seal every few years if recommended for your climate, and repair cracks early. Avoid de-icing products that can damage concrete surfaces, especially in its first winter.
Climate
Asphalt’s flexibility helps it cope with freeze–thaw cycles, and snow melts a little faster on its dark surface. In very hot climates it can soften and mark under heavy loads. Concrete stays firm and cooler in the heat, but in cold regions it can crack and its surface can scale if water and de-icing salts get in – air-entrained concrete mixes are used in freeze–thaw areas for this reason.
Appearance and options
Asphalt has one look – smooth and black – that fades to grey without sealing. Concrete can be coloured, stamped or given decorative finishes, which can suit some home styles better but adds cost.
Installation time
An asphalt driveway can often be driven on within a few days. Concrete needs time to gain strength – typically about a week before cars – and must be kept moist while it cures. Our guide to how long concrete takes to cure explains the timeline.
How to decide
- Choose asphalt if upfront budget matters most, you have cold winters, or you want quick installation and easy repairs.
- Choose concrete if you want the longest lifespan, live somewhere hot, or want decorative finishes.
- Either way, insist on a properly compacted gravel base and good drainage – they matter more than the surface.
Estimating materials
For asphalt, the asphalt calculator converts your driveway’s area and thickness into tons, and how much asphalt do I need explains the maths. Get the base specified in any quote – typically a compacted crushed-stone layer under either surface.
Frequently asked questions
Asphalt is usually cheaper to install; concrete usually lasts longer, so compare cost over the driveway’s life.
Concrete typically lasts longer – often 25–30+ years versus 15–20+ for asphalt – with proper installation and care.
Asphalt generally handles freeze–thaw and de-icing salt better; concrete needs a suitable mix and careful salt use.
Typically every few years, depending on climate and wear – follow your contractor’s or sealer’s advice.
It is possible in some cases with the right preparation, but cracks in the concrete can reflect through. Ask a paving contractor to assess it.
Related calculators
Related articles
- Asphalt Driveway Maintenance: How to Make Your Driveway Last
- How Much Asphalt Do I Need? Tons, Area and Thickness Explained
- House Cleaning Checklist: Daily, Weekly, Monthly and Seasonal Tasks
Sources
- Portland Cement Association – Concrete basics
- U.S. Federal Highway Administration – Highway Materials Engineering Course: Aggregates (PDF)

